Premium 3D Printer Filament PLA 1.75mm | 0.5kg/spool | Wood

Premium 3D Printer Filament PLA 1.75mm | 0.5kg/spool | Wood

  • Laywood is an extrusion material made from 40% recycled wood combined with polymer binders
  • It doesn't warp, doesn't shrink, and doesn't require a heated print bed.
  • The finished product can be sanded like ordinary wood and even smells like wood.
  • The color can be varied from light to dark by increasing the printing temperature through its 190 ~ 220C printing temperature range.
  • Reel Dimension: Spool Diameter: 200mm (7.87"), Spool Width: 37mm (1.46"), Hub Diameter: 53.5mm (2.11"), and Hub Width: 37mm (1.46").
  • Product SKU: 112507
Available: In Stock
€45.99
variant title - Default Title

Give your 3D printed objects the look and feel of real wood using this 1.75mm Laywood 3D Printer Filament from Monoprice!

Laywood is an extrusion material made from 40% recycled wood combined with polymer binders to allow it to melt and print like any other material. It doesn't warp, doesn't shrink, and doesn't require a heated print bed. The finished product can be sanded like ordinary wood and even smells like wood. The color can be varied from light to dark by increasing the printing temperature through its 190 ~ 220°C printing temperature range.

 

Roll dimension:

  • Roll diameter: 200 mm
  • Roller width: 37 mm
  • Hub diameter: 53,5 mm
  • Hub width: 37 mm

How long will it take for my order to arrive?

After the order has been placed, shipping takes about 5-7 business days. Our warehouse is located in the Netherlands.

How much do I have to pay for shipping?

The shipping is free for all orders in the EU. For deliveries to countries outside of the EU shipping costs may apply.

What are the returns policy?

You can return your items to us for free within 14 days without giving a reason. We expect the items to be in their original condition upon return.

How does the return work?

If you do not like an article, you can return it to us within 14 days of delivery. Please contact us at eusupport@monoprice.com to receive a free return label. Please print the return label, stick it on the carefully sealed package and hand it over to your local post office. Please keep the document with the tracking number carefully.

Recently Viewed

3D Printer Filament

3D Printer Filament & Resin

Customer Reviews

Based on 19 reviews
47%
(9)
21%
(4)
21%
(4)
0%
(0)
11%
(2)
D
Dianna C.
Absolutely WONDERFUL!

I absolutely love this wood filament! It took me a while to figure out the best settings for what I was doing with it and have gone through a whole roll trying to figure it out. Now that I believe I've got it right, hopefully my future prints will be spot on without wasting as much as I did this first time. I'm back for more and also plan to get the walnut color along with my next order.For me, I found it works best to use a raft. When I printed directly on the build plate, the plastic-y part seemed to settle at the bottom and is very hard to sand it off. I wasn't able to.

R
Robert R.
Looks Good - remove from printer when not being used

Printing with this material looks good. Follows PLA settings for most part. Recommend NOT keeping stored on printer when not being used as the material becomes a bit brittle and easily breaks when not being moved/printed for a couple of days, which requires a reload of material in any regard.

J
John C.
Problem unwindeing from the reel.

The print turned out fine . It required more scraping then your other filaments. The problem was that it did not come off the reel without overlapping which caused binding. Had to estimate the amount needed and rewind..jay see

C
C H.
Good, but brittle

This filament extrudes and sticks as well as regular PLA. However the end result is pretty brittle, and feels a little like balsa wood. If you're printing something with supports, you have to be pretty careful removing them if you want to preserve finer details.

D
David C.
Very good filament!

Prints well at 195 and 30 bed temp. Don't go to thin on your walls or filament can be very brittle. (I posted pictures on my review on amazon.com)

Customer Reviews

Based on 19 reviews
47%
(9)
21%
(4)
21%
(4)
0%
(0)
11%
(2)
D
Dianna C.
Absolutely WONDERFUL!

I absolutely love this wood filament! It took me a while to figure out the best settings for what I was doing with it and have gone through a whole roll trying to figure it out. Now that I believe I've got it right, hopefully my future prints will be spot on without wasting as much as I did this first time. I'm back for more and also plan to get the walnut color along with my next order.For me, I found it works best to use a raft. When I printed directly on the build plate, the plastic-y part seemed to settle at the bottom and is very hard to sand it off. I wasn't able to.

R
Robert R.
Looks Good - remove from printer when not being used

Printing with this material looks good. Follows PLA settings for most part. Recommend NOT keeping stored on printer when not being used as the material becomes a bit brittle and easily breaks when not being moved/printed for a couple of days, which requires a reload of material in any regard.

J
John C.
Problem unwindeing from the reel.

The print turned out fine . It required more scraping then your other filaments. The problem was that it did not come off the reel without overlapping which caused binding. Had to estimate the amount needed and rewind..jay see

C
C H.
Good, but brittle

This filament extrudes and sticks as well as regular PLA. However the end result is pretty brittle, and feels a little like balsa wood. If you're printing something with supports, you have to be pretty careful removing them if you want to preserve finer details.

D
David C.
Very good filament!

Prints well at 195 and 30 bed temp. Don't go to thin on your walls or filament can be very brittle. (I posted pictures on my review on amazon.com)