Premium 3D Printer Filament PLA-spool | 1 kg/spool

Premium 3D Printer Filament PLA-spool | 1 kg/spool

  • 1.75mm or 3.0mm x 0.10mm PLA filament with roundness variation of less than 0.03mm.
  • Nominal processing temperature of 185° C (365°F).
  • 195mm reel diameter, 95mm hub diameter, 38mm spindle diameter, 80mm reel width.
  • 1 Kg reel
  • Extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%) | PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn
  • Product SKU: 110551
Available: In Stock
€23.99
Color
Black
White
Red
Blue
Bright Green
Crystal Clear
Gray
Gold
Silver
Pink
variant title - Black / 1.75 mm / 1 kg variant title - White / 1.75 mm / 1 kg variant title - Red / 1.75 mm / 1 kg variant title - Black / 3 mm / 1 kg variant title - Blue / 1.75 mm / 1 kg variant title - Bright Green / 1.75 mm / 1 kg variant title - Crystal Clear / 1.75 mm / 1 kg variant title - Gray / 1.75 mm / 1 kg variant title - Gold / 1.75 mm / 1 kg variant title - Silver / 1.75 mm / 1 kg variant title - Pink / 1.75 mm / 1 kg

Get outstanding 3D printing results when you use 1.75mm or 3.0mm PLA 3D Printer Filament from Monoprice™!

PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle.

This 1 kg spool features a thickness of 1.75mm or 3.0mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 185° C (365°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.

The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot.

Features:

  • 1.75mm or 3.0mm x 0.10mm PLA filament with roundness variation of less than 0.03mm
  • It has a nominal processing temperature of 185° C (365°F)
  • 195mm reel diameter, 95mm hub diameter, 38mm spindle diameter, 80mm reel width
  • 1 Kg reel
  • Extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%)
  • PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn

 

Filament Type Monoprice™ PLA
Print Temperature (°C) 190‑210
Bed Temperature (°C) No Heat (60‑80)
Density (g/cm3) 1.24
Distortion Temperature (°C, 0.45 MPa) 56
Melt Flow Index (g/10 min) 5 (190°C/2.16kg)
Tensile Strength (MPa) 65
Elongation at Break (%) 8
Bending Strength (MPa) 97
Flexural Modulus (MPa) 3600
IZOD Impact Strength (kJ/m2) 4

 

 

Support Files:

How long will it take for my order to arrive?

After the order has been placed, shipping takes about 5-7 business days. Our warehouse is located in the Netherlands.

How much do I have to pay for shipping?

The shipping is free for all orders in the EU. For deliveries to countries outside of the EU shipping costs may apply.

What are the returns policy?

You can return your items to us for free within 14 days without giving a reason. We expect the items to be in their original condition upon return.

How does the return work?

If you do not like an article, you can return it to us within 14 days of delivery. Please contact us at eusupport@monoprice.com to receive a free return label. Please print the return label, stick it on the carefully sealed package and hand it over to your local post office. Please keep the document with the tracking number carefully.

Recently Viewed

3D Printer Filament

3D Printer Filament & Resin

Customer Reviews

Based on 505 reviews
63%
(318)
17%
(84)
9%
(45)
5%
(26)
6%
(32)
J
Joan N.
Disappointed

Haven't been able to use it. We were disappointed with the Monoprice 3D mini printer and returned it. Still waiting to hear from Monoprice on the return. Very disappointed with Monoprice.

J
Josh I.
Color differences between batches & more stringy than other MP Filament

First and foremost MP filament has always served me very well, by in large this isn't much of an exception with the following caveats.1. I've had a few spools of this now and the color seems to vary between batches pretty noticably - not a HUGE deal but noticable for sure. The current batch is much darker blue than the last batch. The attached cable chain image shows it pretty clearly. 2. This more than any other color seems to be picky when it comes to printing clean. With the same exact gcode I get very clean prints with white, black and orange MP filament but this one is just a touch stringy and less clean. Not quite sure what the story is there.

P
Pk63015 P.
Gray PLA

Good product. I think my spool had a number of tangles when wound onto the spool. (I made sure not to let it unspool upon loading) Otherwise it is good. It was my first spool for 3D printing so I do not have a comparison to other manufacturers.

R
Richard C.
Outstanding

Outstanding

J
Jim S.
The filament looks

The filament looks great on a finished project, the only problem I have is my monoprice printer started shifting lines and I sent it back 2 weeks ago and haven't gotten it back yet.

Customer Reviews

Based on 505 reviews
63%
(318)
17%
(84)
9%
(45)
5%
(26)
6%
(32)
J
Joan N.
Disappointed

Haven't been able to use it. We were disappointed with the Monoprice 3D mini printer and returned it. Still waiting to hear from Monoprice on the return. Very disappointed with Monoprice.

J
Josh I.
Color differences between batches & more stringy than other MP Filament

First and foremost MP filament has always served me very well, by in large this isn't much of an exception with the following caveats.1. I've had a few spools of this now and the color seems to vary between batches pretty noticably - not a HUGE deal but noticable for sure. The current batch is much darker blue than the last batch. The attached cable chain image shows it pretty clearly. 2. This more than any other color seems to be picky when it comes to printing clean. With the same exact gcode I get very clean prints with white, black and orange MP filament but this one is just a touch stringy and less clean. Not quite sure what the story is there.

P
Pk63015 P.
Gray PLA

Good product. I think my spool had a number of tangles when wound onto the spool. (I made sure not to let it unspool upon loading) Otherwise it is good. It was my first spool for 3D printing so I do not have a comparison to other manufacturers.

R
Richard C.
Outstanding

Outstanding

J
Jim S.
The filament looks

The filament looks great on a finished project, the only problem I have is my monoprice printer started shifting lines and I sent it back 2 weeks ago and haven't gotten it back yet.