Ersatz-Hot-End-Baugruppe für den Mini Delta 3D-Drucker (21666)

Ersatz-Hot-End-Baugruppe für den Mini Delta 3D-Drucker (21666)

  • Sicherheit: Seien Sie immer äußerst vorsichtig, wenn Sie an elektrischen Geräten, einschließlich Ihres 3D-Druckers, arbeiten.
  • Stellen Sie sicher, dass der Netzstecker gezogen und der Drucker vollständig abgekühlt ist, bevor Sie am Drucker arbeiten.
  • Produkt SKU: 133684
Verfügbarkeit: Nicht auf Lager
€41.99
variant title - Default Title

Dies ist ein Ersatz Hot-End-Baugruppe für den Monoprice ™ MP Mini Delta 3D-Drucker.



Monoprice ™ und alle Monoprice-Logos sind Marken von Monoprice Inc.

Wie lange dauert es, bis meine Bestellung ankommt?

Nach der Bestellung dauert der Versand ca. 3-4 Werktage.

Wie viel muss ich für den Versand bezahlen?

Der Versand ist für alle Bestellungen innerhalb der EU kostenlos. Bei Lieferungen in Länder außerhalb der EU können Versandkosten anfallen.

Was sind die Rückgaberichtlinien?

Sie können Ihre Artikel innerhalb von 14 Tagen ohne Angabe von Gründen kostenlos an uns zurücksenden. Wir erwarten, dass sich die Artikel bei der Rückgabe im Originalzustand befinden.

Wie funktioniert die Rücksendung?

Sollte Ihnen ein Artikel nicht gefallen, können Sie ihn innerhalb von 14 Tagen nach Lieferung an uns zurücksenden. Bitte kontaktieren Sie uns unter eusupport@monoprice.com um ein kostenloses Rücksendeetikett zu erhalten. Bitte drucken Sie das Rücksendeetikett aus, kleben es auf das sorgfältig verschlossene Paket und geben es bei Ihrer Postfiliale ab. Bitte bewahren Sie das Dokument mit der Tracking-Nummer sorgfältig auf.

Kürzlich angesehene Produkte

3D Drucken

3D Drucker Ersatzteile & Zubehör

Customer Reviews

Based on 14 reviews
57%
(8)
21%
(3)
7%
(1)
7%
(1)
7%
(1)
J
Joseph M.
Prints like new

Perfect replacement, my machine prints like new again. It comes as a complete assembly too, so now I have spares from the old one since some parts were salvageable.

R
Randall M.
Does what it says on the tin

(This assembly didn't come in a tin ... )I got this item after pricing out the entirety of parts that come in this assembly separately, and realizing that buying the assembly was much more cost effective and also easier to install.This immediately allowed my MP Mini Delta to print properly and with no thermal issues.I would recommend this for anyone whose hot end doesn't like to heat up unless you manually move the wires (my problem) or if the insulation around the hot end is missing (like mine was).

A
Angel D.
It was ok but broke on 1st day

The first day I got it it failed to work and it broke. So I re ordered another one. Fialment didnt get hot enough.

C
Christopher O.
Used for my mini select v1

I have a monoprice mini select v1 (15365) my nozzle got clogged and in pulling things apart I thought I'd broken some parts of the hot end. For version 1 you can upgrade to the E3D V6 hot end after printing a bracket, which I might since you can get knock offs of that head for cheap, but I wanted too get parts from monoprice. While this says it's for the delta printer it works fine for mini select with the following changes:1. Wires need extended2. remove back portion to allow it to mount to mini select (heat sync has a plastic thing on it you can just take off, mini select has this piece connected to the printer, portion the springs grab onto)3. Keep track of the connections I marked all wires when unplugging from the board (they are not marked at all and all look the same)4. re level bed as the new nozel is not exactly same length (I had to raise my bed about 2.5 twists) you're bed may be different, but will still need adjusted like with any change of the printer.5. I also re used my original fan with it's bracket, but you don't have to.Happy hobby-ing I'm back up and printing

K
Katsuhiro N.
good!

Replacing parts was easy. It's molded smoothly compared to before replacement.

Customer Reviews

Based on 14 reviews
57%
(8)
21%
(3)
7%
(1)
7%
(1)
7%
(1)
J
Joseph M.
Prints like new

Perfect replacement, my machine prints like new again. It comes as a complete assembly too, so now I have spares from the old one since some parts were salvageable.

R
Randall M.
Does what it says on the tin

(This assembly didn't come in a tin ... )I got this item after pricing out the entirety of parts that come in this assembly separately, and realizing that buying the assembly was much more cost effective and also easier to install.This immediately allowed my MP Mini Delta to print properly and with no thermal issues.I would recommend this for anyone whose hot end doesn't like to heat up unless you manually move the wires (my problem) or if the insulation around the hot end is missing (like mine was).

A
Angel D.
It was ok but broke on 1st day

The first day I got it it failed to work and it broke. So I re ordered another one. Fialment didnt get hot enough.

C
Christopher O.
Used for my mini select v1

I have a monoprice mini select v1 (15365) my nozzle got clogged and in pulling things apart I thought I'd broken some parts of the hot end. For version 1 you can upgrade to the E3D V6 hot end after printing a bracket, which I might since you can get knock offs of that head for cheap, but I wanted too get parts from monoprice. While this says it's for the delta printer it works fine for mini select with the following changes:1. Wires need extended2. remove back portion to allow it to mount to mini select (heat sync has a plastic thing on it you can just take off, mini select has this piece connected to the printer, portion the springs grab onto)3. Keep track of the connections I marked all wires when unplugging from the board (they are not marked at all and all look the same)4. re level bed as the new nozel is not exactly same length (I had to raise my bed about 2.5 twists) you're bed may be different, but will still need adjusted like with any change of the printer.5. I also re used my original fan with it's bracket, but you don't have to.Happy hobby-ing I'm back up and printing

K
Katsuhiro N.
good!

Replacing parts was easy. It's molded smoothly compared to before replacement.