Filament PLA Pour Imprimante 3D Premium 1,75 mm | Bois | 0,5 kg/bobine

Filament PLA Pour Imprimante 3D Premium 1,75 mm | Bois | 0,5 kg/bobine

  • Le Laywood est un matériau d’extrusion composé de 40 % de bois recyclé associé à des liants polymères afin de lui permettre de fondre et d’être imprimé comme n’importe quel autre matériau.
  • Il ne se déforme pas, ne rétrécit pas, et ne nécessite pas de plateau chauffant.
  • Le produit fini peut être poncé comme le bois ordinaire et a même l’odeur du bois.
  • La couleur peut être variée du clair au foncé en augmentant la température d’impression entre sa plage de température d’impression de 190 à 220 °C.
  • Dimension de la bobine: diamètre de la bobine: 200 mm (7,87 "), largeur de la bobine: 37 mm (1,46"), diamètre du moyeu: 53,5 mm (2,11 ") et largeur du moyeu: 37 mm (1,46").
  • UGS du produit 112507
Disponible: En stock
€45.99
variant title - Default Title

Donnez à vos objets imprimés en 3D l'aspect et la sensation du vrai bois en utilisant ce filament pour imprimante 3D Laywood de 1,75 mm de Monoprice!

Laywood est un matériau d'extrusion composé à 40% de bois recyclé combiné à des liants polymères. Il ne se déforme pas, ne rétrécit pas et ne nécessite pas de lit d'impression chauffé. Le produit fini peut être poncé comme du bois ordinaire et sent même le bois. La couleur peut varier de clair à foncé en augmentant la température d'impression à travers sa plage de température d'impression de 190 ~ 220C.

Dimension de la bobine:

  • Diamètre de la bobine: 200 mm (7,87 pouces)
  • Largeur de la bobine: 37 mm (1,46 pouces)
  • Diamètre du moyeu: 53,5 mm (2,11 pouces)
  • Largeur du moyeu: 37 mm (1,46 pouces)

Au bout de combien de temps vais-je recevoir ma commande ?

Après que votre commande a été placée, l'expédition est effectuée sous 3 à 4 jours ouvrés.

Quel montant dois-je payer pour les frais d'expédition ?

Livraison gratuite à partir de 30€.

Quelle est votre politique de retour ?

Vous pouvez nous retourner vos articles sous 14 jours sans raison particulière. Les articles retournés doivent être dans leur condition d'origine.

Comment fonctionne le retour ?

Si votre article ne vous convient pas, vous pouvez nous le retourner sous une période de 14 jours suivant la livraison. Veuillez nous contacter à eusupport@monoprice.com pour recevoir votre étiquette de retour gratuite. Veuillez imprimer l'étiquette de retour, la coller avec soin sur le paquet scellé puis retourner le paquet auprès de votre bureau de poste local. Merci de conserver soigneusement le document qui comporte le numéro de suivi.

Derniers articles vus

Customer Reviews

Based on 19 reviews
47%
(9)
21%
(4)
21%
(4)
0%
(0)
11%
(2)
D
Dianna C.
Absolutely WONDERFUL!

I absolutely love this wood filament! It took me a while to figure out the best settings for what I was doing with it and have gone through a whole roll trying to figure it out. Now that I believe I've got it right, hopefully my future prints will be spot on without wasting as much as I did this first time. I'm back for more and also plan to get the walnut color along with my next order.For me, I found it works best to use a raft. When I printed directly on the build plate, the plastic-y part seemed to settle at the bottom and is very hard to sand it off. I wasn't able to.

R
Robert R.
Looks Good - remove from printer when not being used

Printing with this material looks good. Follows PLA settings for most part. Recommend NOT keeping stored on printer when not being used as the material becomes a bit brittle and easily breaks when not being moved/printed for a couple of days, which requires a reload of material in any regard.

J
John C.
Problem unwindeing from the reel.

The print turned out fine . It required more scraping then your other filaments. The problem was that it did not come off the reel without overlapping which caused binding. Had to estimate the amount needed and rewind..jay see

C
C H.
Good, but brittle

This filament extrudes and sticks as well as regular PLA. However the end result is pretty brittle, and feels a little like balsa wood. If you're printing something with supports, you have to be pretty careful removing them if you want to preserve finer details.

D
David C.
Very good filament!

Prints well at 195 and 30 bed temp. Don't go to thin on your walls or filament can be very brittle. (I posted pictures on my review on amazon.com)

Customer Reviews

Based on 19 reviews
47%
(9)
21%
(4)
21%
(4)
0%
(0)
11%
(2)
D
Dianna C.
Absolutely WONDERFUL!

I absolutely love this wood filament! It took me a while to figure out the best settings for what I was doing with it and have gone through a whole roll trying to figure it out. Now that I believe I've got it right, hopefully my future prints will be spot on without wasting as much as I did this first time. I'm back for more and also plan to get the walnut color along with my next order.For me, I found it works best to use a raft. When I printed directly on the build plate, the plastic-y part seemed to settle at the bottom and is very hard to sand it off. I wasn't able to.

R
Robert R.
Looks Good - remove from printer when not being used

Printing with this material looks good. Follows PLA settings for most part. Recommend NOT keeping stored on printer when not being used as the material becomes a bit brittle and easily breaks when not being moved/printed for a couple of days, which requires a reload of material in any regard.

J
John C.
Problem unwindeing from the reel.

The print turned out fine . It required more scraping then your other filaments. The problem was that it did not come off the reel without overlapping which caused binding. Had to estimate the amount needed and rewind..jay see

C
C H.
Good, but brittle

This filament extrudes and sticks as well as regular PLA. However the end result is pretty brittle, and feels a little like balsa wood. If you're printing something with supports, you have to be pretty careful removing them if you want to preserve finer details.

D
David C.
Very good filament!

Prints well at 195 and 30 bed temp. Don't go to thin on your walls or filament can be very brittle. (I posted pictures on my review on amazon.com)