Feuille de Construction de Rechange Pour l'Imprimante 3D Voxel (33820, 35880 et 35881)

Feuille de Construction de Rechange Pour l'Imprimante 3D Voxel (33820, 35880 et 35881)

Ajouter votre avis
  • Ceci est une plaque de construction de remplacement pour l'imprimante 3D Monoprice Voxel
  • Soyez prudent lorsque vous changez la plaque de construction, ou tout autre composant, sur votre imprimante 3D.
  • Service et assistance: contactez notre équipe d'assistance technique pour des questions sur nos produits, le dépannage ou même des suggestions de produits répondant à vos besoins particuliers.
  • Vous n'êtes jamais seul avec les produits Monoprice! Nous avons une équipe complète de techniciens sympathiques et compétents disponibles pour répondre à vos questions
  • UGS du produit 137875
Disponible: En stock
€8.99
variant title - Default Title

Ceci est un remplacement Feuille de construction pour l'imprimante 3D Monoprice ™ Voxel (33820, 35880 et 35881).

Lorsque vous changez des pièces sur votre imprimante 3D, faites toujours preuve d'une extrême prudence. Il est recommandé de contacter Monoprice avant d'apporter des modifications à votre imprimante 3D.

 

Monoprice ™ et tous les logos Monoprice sont des marques de commerce de Monoprice Inc.

Au bout de combien de temps vais-je recevoir ma commande ?

Après que votre commande a été placée, l'expédition est effectuée sous 3 à 4 jours ouvrés.

Quel montant dois-je payer pour les frais d'expédition ?

Livraison gratuite à partir de 30€.

Quelle est votre politique de retour ?

Vous pouvez nous retourner vos articles sous 14 jours sans raison particulière. Les articles retournés doivent être dans leur condition d'origine.

Comment fonctionne le retour ?

Si votre article ne vous convient pas, vous pouvez nous le retourner sous une période de 14 jours suivant la livraison. Veuillez nous contacter à eusupport@monoprice.com pour recevoir votre étiquette de retour gratuite. Veuillez imprimer l'étiquette de retour, la coller avec soin sur le paquet scellé puis retourner le paquet auprès de votre bureau de poste local. Merci de conserver soigneusement le document qui comporte le numéro de suivi.

Derniers articles vus

Bestsellers

Impression 3D

Customer Reviews

Based on 7 reviews
57%
(4)
14%
(1)
14%
(1)
0%
(0)
14%
(1)
M
Michele L.
Excellent Replacement Build Sheet

Nice and clean. Reasonable price.

W
Wartan N.
I have not

I have not received my order. It has been almost 1 month.

J
Jeremy Z.
Best price for the sticker, go elsewhere for the plate.

In an awkward turn of events, Monoprice's Voxel parts vary widely in pricing. While it is identical to the Flashforge Adventurer 3, and the parts are swappable, this build surface sticker (this is just the upper textured part, not the build plate) is 1/3 of the price it is from Flashforge (when I ordered), but the full plate with sticker is 2x as much from Monoprice than it is from Flashforge (bought 3 spares).These are REALLY hard to remove, but it needs to be that way.To remove, get under one corner with a plastic scraper or something thin, and then pull back at a 180 degree angle. Be careful, and go all the way around to make it easier when it gets wider. It is hard to get off.To get rid of the adhesive once you've pulled the old one off, spray with Goo Gone and let it sit for awhile. You may need to massage the Goo Gone into the thick adhesive left over, but after doing so and letting it sit for a few minutes the adhesive will roll right off. Wash with hot soap and water and dry before replacing the surface sticker.I'm going to be using blue painters tape if I get over sticking problems again, but since I moved to the Adventurer 3's firmware and calibrated the head properly, I'm not getting the problem I had anymore (inability to remove prints from the bed).

J
James M.
Better instructions needed

Build sheet is identical to the original so big thumbs up there. It should come with instructions for how to remove the existing sheet without leaving me with a mess of adhesive residue that took hours to remove. There are videos on-line for that but I wasn?t directed to them either.

B
Bradley M.
good product but no removal of old one instructions

Good product, reasonable price. Only comment is that some instruction on best way to remove old cracked one from the plate would have been useful. In the end I used a razor blade scraper to gently pull the old one off and then cleaned the plate with nail polish remover and about an hour worth of scrubbing with nail polish remover and paper towel. once cleaned the new one went on perfectly. If there is a better way to remove and clean I would appreciate the instructions... If it had come with that I would have rated at 4 or 5 stars depending on effort required to remove and clean...

12

Customer Reviews

Based on 7 reviews
57%
(4)
14%
(1)
14%
(1)
0%
(0)
14%
(1)
M
Michele L.
Excellent Replacement Build Sheet

Nice and clean. Reasonable price.

W
Wartan N.
I have not

I have not received my order. It has been almost 1 month.

J
Jeremy Z.
Best price for the sticker, go elsewhere for the plate.

In an awkward turn of events, Monoprice's Voxel parts vary widely in pricing. While it is identical to the Flashforge Adventurer 3, and the parts are swappable, this build surface sticker (this is just the upper textured part, not the build plate) is 1/3 of the price it is from Flashforge (when I ordered), but the full plate with sticker is 2x as much from Monoprice than it is from Flashforge (bought 3 spares).These are REALLY hard to remove, but it needs to be that way.To remove, get under one corner with a plastic scraper or something thin, and then pull back at a 180 degree angle. Be careful, and go all the way around to make it easier when it gets wider. It is hard to get off.To get rid of the adhesive once you've pulled the old one off, spray with Goo Gone and let it sit for awhile. You may need to massage the Goo Gone into the thick adhesive left over, but after doing so and letting it sit for a few minutes the adhesive will roll right off. Wash with hot soap and water and dry before replacing the surface sticker.I'm going to be using blue painters tape if I get over sticking problems again, but since I moved to the Adventurer 3's firmware and calibrated the head properly, I'm not getting the problem I had anymore (inability to remove prints from the bed).

J
James M.
Better instructions needed

Build sheet is identical to the original so big thumbs up there. It should come with instructions for how to remove the existing sheet without leaving me with a mess of adhesive residue that took hours to remove. There are videos on-line for that but I wasn?t directed to them either.

B
Bradley M.
good product but no removal of old one instructions

Good product, reasonable price. Only comment is that some instruction on best way to remove old cracked one from the plate would have been useful. In the end I used a razor blade scraper to gently pull the old one off and then cleaned the plate with nail polish remover and about an hour worth of scrubbing with nail polish remover and paper towel. once cleaned the new one went on perfectly. If there is a better way to remove and clean I would appreciate the instructions... If it had come with that I would have rated at 4 or 5 stars depending on effort required to remove and clean...

12